Preparing for use
5.3 Transportation and storage
SIMOTICS M-1FE2 built-in motors
84 Hardware Installation Manual, 04/2020, A5E50074509B AA
Identification of the storage location
Mark the storage location clearly with warning notices as per the packaging of the built-in
motors.
Note
This identification must also be visible af
ter removal of the external packaging.
Label on the packaging of the rotor in the synchronous version
Use this label for identifying the bearing location of motors in the synchronous version.
① Warning against magnetic field (W006)
② Warning against hand injuries (W024)
③ Danger of crushing by more than 500 kg
④ No access for persons with metallic implants
(P014)
⑤ No access for persons with pacemakers or
implanted defibrillators (P007)
⑥ For synchronous motors, maintain a minimum
clearance of 500 mm
Observe the instructions for use (M002)
The warning and information signs comply with ISO 7010; the information in brackets defines the sign
according to ISO 7010
Please observe the warning instructions on the packaging and labels.