Siemens Sinamics G120 CU240S DP - Page 153

Functions
5.11 Operation in fieldbus systems
Frequency inverter
Operating Instructions, 08.10. 2008, t.b.d.
153
Parameter ID (PKE) and parameter index (IND)
The parameter ID (PKE) is always a 16 bit value. In conjunction with the index (IND), it
defines the parameter to be transferred.
3.(
,1'
3:(

$.
318
630

VW
ZRUG
3DUDPHWHUFKDQQHO

QG
ZRUG

UG
DQG
WK
ZRUG
3.(
,1'
3:(


VW
ZRUG

QG
ZRUG

UG
DQG
WK
ZRUG
6XELQGH[,1'3DJHLQGH[
3DUDPHWHUFKDQQHO
PKE structure IND structure
● The parameter number is encoded in the lower 11 bits (PNU) of the PKE. Since the PNU
can only contain values up to 2000, an offset must also be encoded for parameter
numbers above 2000. The offset is set in the first word of the index (IND) as shown in the
table below.
● Bit 11 (SPM) is reserved and is always 0.
● Bits 12 to 15 (AK) contain the request or response ID.
The meaning of the request ID for request message frames (master → converter) is
explained in the following table.
,1'

DGFEI H
IND page index
Table 5- 50 Regulations for setting the PNU
Parameter range Page index Bit Hex value + PNU
a b c d f e 9 8
0000 … 1999 0 0 0 0 0 0 0 0 0x00 0 – 7CF
2000 … 3999 1 0 0 0 0 0 0 0 0x80 0 – 7CF
4000 … 5999 0 0 0 1 0 0 0 0 0x10 0 – 7CF
6000 … 7999 1 0 0 1 0 0 0 0 0x90 0 – 7CF
8000 … 9999 0 0 1 0 0 0 0 0 0x20 0 – 7CF
… … … … … … … … … … …
32.000 … 33.999 0 0 0 0 1 0 0 0 0x8 0 – 7CF
… … … … … … … … … … …
64.000 … 65.999 1 1 1 1 0 1 0 0 0xF4 0 – 7CF