Siemens SINAMICS G120P - Page 102

Communication via EtherNet/IP
4.5 Supported objects
Fieldbuses
100 Function Manual, 04/2018, FW V4.7 SP10, A5E34229197B AE
No.
Service
Type
Name
Value/explanation
5 get_and_
clear
Struct of
Media Counters
Media-specific counters
UINT32 Alignment Errors Structure received, which does not match the num-
ber of octets
UINT32 FCS Errors Structure received, which does not pass the FCS
check
UINT32 Single Collisions Structure successfully transmitted, precisely one
collision
UINT32 Multiple Colli-
sions
Structure successfully transmitted, several colli-
sions
UINT32
SQE Test Errors
Number of SQE errors
UINT32 Deferred Trans-
missions
First transmission attempt delayed
UINT32 Late Collisions Number of collisions that occurred delayed by 512
bit timers to the request
UINT32 Excessive Colli-
sions
Transmission unsuccessful as a result of intensive
collisions
UINT32 MAC Transmit
Errors
Transmission unsuccessful as a result of an internal
MAC sublayer transmission error.
UINT32 Carrier Sense
Errors
Times that the carrier sense condition was lost or
never asserted when attempting to transmit a frame
UINT32
Frame Too Long
Structure too large
UINT32 MAC Receive
Errors
Transmission unsuccessful as a result of an internal
MAC sublayer receive error.
6 get, set
Struct of
Interface Control
UINT16 Control Bits
UINT16 Forced Interface
Speed
10
get
String
Interface_Label
Interface-Label