Siemens SINAMICS G120P - Page 55

Communication via PROFIBUS and PROFINET
3.3 PROFIdrive profile - Diagnostic channels
Fieldbuses
Function Manual, 04/2018, FW V4.7 SP10, A5E34229197B AE
53
Diagnostics alarm with DS0 / DS1
1) Alarm specifier
1: Fault is active and the slot is not OK
2: Fault is resolved and the slot is OK
3: Fault is resolved and the slot is not OK
4) Module fault
0: No fault is active
1: Fault is active
2) Channel fault present
0: No fault is active
1: Fault is active
5) Channel information present
1: DS1 exists
3) Internal fault
0: No fault is active
1: Fault is active
6) Type of class module = 0011
(distributed)
A table with the message classes is provided in the List Manual of the inverter.
Overview of the manuals (Page 232)