Siemens SINAMICS PM240-2

Accessories
8.8 Braking resistor
Power Module PM240-2
138 Hardware Installation Manual, 01/2020, A5E33294624B AL
8.8.2 Technical data of the braking resistor
For the converters, use the following or comparable braking resistors. The technical
properties and statements made by the manufacturer apply.
Note
Braking resistors FSD … FSF
Only use braking resistors that are UL approved, and have successfully passed the
"Abnormal Operation Test" according to UL 508.
FSG braking resistors
Make sure that the monitoring system for braking resistor tempera
ture shuts down the
converter in the event of any overload.
Example:
Figure 8-5 Connecting a braking resistor with temperature monitoring via
digital inpu
t DI 3 and line contactor control (-K1) via digital output DO 2 (Page 137)
Braking resistors for PM240-2, 200 V
Table 8- 5 Technical data
Article number
Re-
sistance
Maximum
power, P
max
Connection
R1 / R2
Degree of
protection
Power Module
Rated power
P
db
Weight
Article numbers
Frame
size
JJY:023146720008 200 Ω
0.75 kW
Connecting cable
integrated in the
braking resistor
IP20
6SL3210-1PB13-0 . L0
6SL321 . -1PB13-8 . L0
FSA
37.5 W
0.5 kg
JJY:023151720007 68 Ω
2.2 kW
IP20
6SL3210-1PB15-5 . L0
6SL3210-1PB17-4 . L0
6SL321 . -1PB21-0 . L0
FSB
110 W 0.7 kg
JJY:02 3163720018 37 Ω
4 kW
IP20
6SL3210-1PB21-4 . L0
6SL321 . -1PB21-8 . L0
FSC
200 W
1.1 kg
JJY:023433720001 20 Ω
7.5 kW
IP20
6SL3210-1PC22-2 . L0
6SL3210-1PC22-8 . L0
FSC
375 W
2 kg
JJY:023422620002 7.5 Ω
18.5 kW
10 mm
2
/ 0.5 Nm
8 AWG / 4.5 lbf in
IP21
6SL3210-1PC24-2UL0
6SL3210-1PC25-4UL0
6SL321 . -1PC26-8UL0
FSD
930 W 7.0 kg
JJY:023423320001 4.5 Ω
30 kW
16 mm
2
/ 1.2 Nm
6 AWG / 10.6 lbf in
IP21
6SL3210-1PC28-0UL0
6SL321 . -1PC31-1UL0
FSE
1500 W
8.5 kg
JJY:023434020003 2.5 Ω 55 kW 16 mm
2
/ 1.2 Nm
6 AWG / 10.6 lbf in
IP21 6SL3210-1PC31-3UL0
6SL3210-1PC31-6UL0
6SL321 . -1PC31-8UL0
FSF
2750 W 13.5 kg