Siemens SINAMICS PM240-2 - Line harmonics filter

Accessories
8.6 Line harmonics filter
Power Module PM240-2
126 Hardware Installation Manual, 01/2020, A5E33294624B AL
Table 8- 2 Assignment table
Power Module, 400 V
Line filter (Class B regarding conducted emissions)
Frame size
Article number
Power
Article number
FSA 6SL3210-1PE11-8UL1
6SL3210-1PE12-3UL1
6SL3210-1PE13-2UL1
6SL3210-1PE14-3UL1
6SL3210-1PE16-1UL1
6SL321 .-1PE18-0UL1
0.55
0.75
1.1
1.5
2.2
3.0
6SL3203-0BE17-7BA0
FSB 6SL3210-1PE21-1UL0
6SL3210-1PE21-4UL0
6SL321 .-1PE21-8UL0
4.0
5.5
7.5
6SL3203-0BE21-8BA0
FSC 6SL3210-1PE22-7UL0
6SL321 .-1PE23-3UL0
11
15
6SL3203-0BE23-8BA0
8.6 Line harmonics filter
The line harmonics filters reshape the distorted current back to the desired sinusoidal
waveform.
With the line harmonics filters the converter fulfills the IEEE 519 standards.
For technical details refer to the following link:
Line harmonics filters
(https://www.schaffner.com/products/download/product/datasheet/fn-3440-ecosine-50hz-
passive-harmonic-filters/)
Note
If you use a line harmonics filter the permissible line voltage is
380 V ... 415 V 3 AC ±10 %
instea
d of 380 V ... 480 V 3 AC ± 10 % without a line harmonics filter.