Accessories
8.12 dv/dt filter plus VPL
Power Module PM240-2
154 Hardware Installation Manual, 01/2020, A5E33294624B AL
8.12 dv/dt filter plus VPL
A combination of dv/dt filter and a voltage peak limiter (VPL)
– dv/dt
PL – is available to suppress voltage peaks.
When using a dv/dt filter plus VPL, observe the following restrictions:
The output frequency must not exceed 150 Hz.
The pulse frequency must not exceed 4 kHz.
Further information is provided on the Internet:
●
Voltage limiter and dv/dt filter (https://www.mdexx.com/wp-
content/uploads/2019/11/BAF-18-001-76_Instruction_manual.pdf)
● FAQ of dv/dt filter plus VPL
(https://support.industry.siemens.com/cs/ww/en/ps/13224/faq)
dv/dt filters plus VPL for PM240-2 Power Modules, 380 V … 480 V
FSD
6SL3210-1PE24-5 .L0
22 kW, 30 kW JTA:TEF1203-0JB
FSD
6SL321 .-1PE27-5 .L0
37 kW, 45 kW JTA:TEF1203-0KB
FSE
6SL321 .-1PE31-1 .L0
55 kW, 75 kW JTA:TEF1203-0LB
FSF 6SL3210-1PE31-8 .L0
6SL3210-1PE32-1 .L0
90 kW … 132 kW JTA:TEF1203-0MB
dv/dt filters plus VPL for PM240-2 Power Modules, 500 V … 690 V
FSD 6SL3210-1PH21-4 .L0
6SL3210-1PH22-0 .L0
11 kW … 18.5 kW JTA:TEF1203-0GB
6SL3210-1PH23-5 .L0
6SL3210-1PH24-2 .L0
6SL3210-1PH25-2 .L0
6SL3210-1PH26-2 .L0
6SL3210-1PH28-0 .L0
6SL3210-1PH31-0 .L0
6SL3210-1PH31-2 .L0
6SL3210-1PH31-4 .L0
FSG 6SL3210-1PH31-7CL0
6SL3210-1PH32-1CL0
160 kW … 250 kW JTA:TEF1203-0MB