WARNING
Exceeding the permitted short-circuit currents
Serious follow-on faults are possible, if the specified short-circuit current values are exceeded.
This can result in death, serious injury or material damage.
Observe the maximum permitted short-circuit currents and maximum specified short-circuit
times.
NOTICE
Incorrect parameterization
The drive may malfunction if you change the parameters.
Do not change the parameters, e.g. for the motor circuit-breaker.
Note
To complement these operating instructions, the List Manual contains an overview of all
parameters as well as a selection of function diagrams to describe the operating principle.
Only trained personnel may operate the converter.
Operation
8.1 Safety instructions for operation
SINAMICS SM150 6SL3845-7NN46-7AA0
124 Operating Instructions 04/2017
To Next Page
Loading...
