EasyManua.ls Logo

Siemens SINAMICS SM150

Siemens SINAMICS SM150
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
When transporting by crane, note that the force is applied via the transport rails attached to
the bottom of the cabinet.
Note
Lifting bars
The lifting bars are not included in the scope of delivery.
WARNING
Inadequately dimensioned lifting rods
Inadequately dimensioned lifting rods are liable to bend or break. The drive could drop off the
crane. This can result in death, serious injury or material damage.
Use suitable lifting rods for transporting. The weight of the cabinet is indicated on the rating
plate.
NOTICE
Improper lifting
If the transport unit is lifted incorrectly, this can damage the decorative trim, cabinet doors,
or fans.
Protect the cabinet and protruding parts against damage.
Always lift the transport units with the appropriate spreading devices or hoisting tackle.
Procedure
1. If there are several holes, select which holes to use based on the center of gravity.
2. Push the lifting bars through the holes.
Figure 4-3 Lifting bar label
Preparations for use
4.3 Transportation
SINAMICS SM150 6SL3845-7NN46-7AA0
Operating Instructions 04/2017 89

Table of Contents

Other manuals for Siemens SINAMICS SM150

Related product manuals