Siemens SINAMICS SM150

Examples of the arrangement of the side panels





˂/
① Re-cooling unit
② Transportation unit
Figure 5-1 Connecting two transportation units





˂/


;
;

① Re-cooling unit
② Transportation unit
Figure 5-2 Connecting four transportation units
5.4 Screwing the transport units together
NOTICE
Stress
Stress that occurs during transport may exert mechanical pressure on the components.
Material damage can result.
● Line the cabinets up precisely with each other in order to avoid shearing forces when the
base units are screwed together.
● Install the drive only on a level and horizontal surface.
Preparatory steps
1. Ensure that access to the holes in the bottom of the cabinets is unobstructed.
2. Remove the guard covers.
Installation
5.4 Screwing the transport units together
SINAMICS SM150 6SL3845-7NN46-7AA0
Operating Instructions 04/2017 99