Required tools
● Standard RHM 23 stacker, MLFB 6SC8476-1EA00-0AA0
● Changing device, MLFB 6SL3986-6YX00-0AA0
Procedure
1. Place the changing device on wooden beams so that the stacker can be positioned under
it.
① Bracket to secure the metal plate ② stop brackets
Figure 9-8 Attaching the changing device to the forklift truck
2. Position the stacker under the changing device, so that the base frame is resting on the
forks.
3. Assemble the bracket ① to secure the base frame in place.
Figure 9-9 Attaching the changing device to the forklift truck
4. Insert the outer stop brackets ② at the points provided to prevent the component to be
replaced from rolling away.
Maintenance
9.7 Repairs
SINAMICS SM150 6SL3845-7NN46-7AA0
172 Operating Instructions 04/2017
To Next Page
Loading...
