Installing and putting a SINAUT modem into operation
5.7 Analog dial-up modem MD3
Station control system
240 System Manual, 07/2009, C79000-G8976-C178-07
Table 5- 32 Setting standard dedicated line profiles
Profile no. Meaning Setting on DIL switch
8 300 bps (direct)
(suitable only for RS-232 port)
2))
21
9 1200 bps (direct)
(suitable only for RS-232 port)
2))
21
10 2400 bps (direct)
(suitable only for RS-232 port)
2))
21
11 9600 bps (direct)
(suitable only for RS-232 port)
2))
21
12 19200 bps (direct)
(suitable only for RS-232 port)
2))
21
13 19200 bps (buffered)
(suitable only for RS-232 port)
2))
21
14 33600 bps (buffered)
(suitable only for RS-232 port)
2))
21
15 AT mode
Freely configurable
(also suitable for RS-485 port)
2))
21
Note
The selection of the standard dedicated line profile not only depends on the required
transmission speed but also on the interface to be used, the RS-232 or the RS-485 interface.
Standard dedicated line profiles 8 to 14 are only suitable for use with the RS-232 interface. If
you require the RS-485 interface, the user-configurable dedicated line profile 15 must be set
and configured. Profile 15 can, however, also be used with the RS-232 interface.
To Next Page
Loading...
