Introduction to the SINAUT ST7 system
1.10 SINAUT ST7cc, the add-on for WinCC
Station control system
72 System Manual, 07/2009, C79000-G8976-C178-07
ā For TIMs (TIM 4x), connected to the ST7cc PC over MPI, time synchronization is possible
only with a TIM equipped with a DCF77 receiver. This then serves as the central time
synchronization source for the ST7cc PC and all other TIMs connected to MPI. These, in
turn, synchronize their stations connected over the WAN.
ā For TIMs (TIM 3V-IE) connected directly to the ST7cc PC over IP-based WAN, the time is
synchronized by ST7cc.
A GPS receiver is recommended outside the reception range of the DCF77 time transmitter;
this can determine the local time from the satellite-based GPS system (Global Positioning
System).
1.10.4 Ordering data for SINAUT ST7cc
Table 1- 10 Ordering data for SINAUT ST7cc
Short name Order no. Explanation
SINAUT ST7cc SINAUT ST7cc
Software for connecting SINAUT stations to
WinCC (Windows 2000 / XP / Server 2003); single
license for one installation of the runtime software;
Runtime software, configuration software, and
electronic manual on CD-ROM; license key on
diskette; German/English
SINAUT ST7cc S 6NH7 997-7CA15-0AA1 Small license for a maximum of 6 SINAUT stations
SINAUT ST7cc M 6NH7 997-7CA15-0AA2 Medium license for a maximum of 12 SINAUT
stations
SINAUT ST7cc L 6NH7 997-7CA15-0AA3 Large license for more than 12 SINAUT stations
SINAUT ST7cc R 6NH7 997-8CA15-0AA0 Redundancy license for ST7cc (contains 2
licenses);
2 individual licenses ST7cc S, M or L are also
required.
SINAUT ST7cc SM 6NH7 997-7AA00-0AD2 License upgrade from ST7cc S to ST7cc M (from
6 to 12 stations)
SINAUT ST7cc SL 6NH7 997-7AA00-0AD3 License upgrade from ST7cc S to ST7cc L (from 6
to more than 12 stations)
SINAUT ST7cc ML 6NH7 997-7AA00-0AE3 License upgrade from ST7cc M to ST7cc L (from
12 to more than 12 stations)
MANUAL ST7cc D 6NH7 998-7AA11 SINAUT ST7cc manual on paper, German
MANUAL ST7cc E 6NH7 998-7AA21 SINAUT ST7cc manual on paper, English
To Next Page
Loading...
