Siemens SINAUT ST7 - Technical Specifications of SINAUT St7 Cc; SINAUT St7 Sc SCADA Connect Software

Introduction to the SINAUT ST7 system
1.11 SINAUT ST7sc SCADA Connect software
Station control system
System Manual, 07/2009, C79000-G8976-C178-07
73
1.10.5 Technical specifications of SINAUT ST7cc
SINAUT ST7cc
Operating systems Windows XP Prof. SP1, SP2,
Windows 2000 Prof. SP1, 2, 3, 4
Windows Server 2003 Standard Edition + SP1
WinCC versions WinCC V5.0 SP2 or higher
WinCC V5.1 SP1 or higher
WinCC V6.0 SP1 or higher
WinCC V6.0 SP2 HF5 or higher
WinCC V6.0 SP3 HF2 or higher
WinCC V6.0 SP4 or higher
STEP 7/NCM versions SIMATIC NCM PC/S7 V5.3 SP2
or
SIMATIC STEP 7 V5.3 SP1
SIMATIC NET PC software versions SIMATIC NET PC software V6.2;
SIMATIC NET PC software V 6.3
Configuration
• ST7cc
• SINAUT system
• ST7cc Config Tool V2.5
• SINAUT ST7 configuration software V3.5;
SINAUT ST7 configuration software V3.6
Configuration limits
• 6 SINAUT stations
• 12 SINAUT stations
• For more than 12 SINAUT stations
• Small license
• Medium license
• Large license
1.11 SINAUT ST7sc SCADA Connect software
The SINAUT system allows the networking of SIMATIC stations with a control center over a
classic or IP-based WAN (Wide Area Network). This control center can also be a SIMATIC
station or a PC-based control center, for example, WinCC with the SINAUT ST7cc add-on.
SINAUT ST7sc allows the manufacturers of control systems to connect to SINAUT without
needing to integrate a SINAUT interface. Communication is over OPC: As an OPC server,
SINAUT ST7sc forms the interface between the SINAUT system and a control system
connected as an OPC client.
The OPC interface is also suitable for data exchange with other applications, for example,
the Microsoft Office application Excel.