Siemens SINAUT ST7 - Cable for Connecting TIM and Modem Modules

Introduction to the SINAUT ST7 system
1.8 Connecting cables
Station control system
System Manual, 07/2009, C79000-G8976-C178-07
57
1.8.1 Cable for connecting TIM and modem modules
Table 1- 6 Standard cables for connecting TIM and modem modules
Order no. Description Illustration
6NH7701-4AL Cable for connecting a TIM 3V-IE / TIM 4 (RS-232) with one of the
SINAUT ST7 MD2, MD3 or MD4 modems (RS-232). Also suitable for
connecting the modems listed above to a SIMATIC point-to-point CP such
as the CP 340, CP 341 or CP 441 with RS-232 port.
Cable length 1.5 m
0'7,0
6NH7701-4DL Cable for connecting a TIM 4 (RS-485) with multiple SINAUT ST7
dedicated line modems of the type MD2 or MD3 (RS-485) connected in
parallel.
Cable length 1.5 m
0'
7,0
6NH7701-1CB Cable for connecting two MD2 modems (RS-232) to form a repeater.
Cable length 0.3 m
0'
0'
6NH7701-5AN Cable for connecting a TIM 3V-IE / TIM 4 (RS-232) with the GSM mobile
wireless modem MD720-3 (RS-232). Also suitable for third-party modems
or wireless devices with RS-232 standard.
Cable length 2.5 m.
*60
PRGHP
7,0
6NH7701-4BN Cable with one end without connector for connection of a
TIM 3V-IE/TIM 4 to a third-party modem or wireless device (RS-232).
Cable length 2.5 m
7KLUG
SDUW\
PRGHP
ZLUHOHVV
GHYLFH
7,0
6NH7701-0AR Test cable.
Cable for connecting two TIMs of the types TIM 3V-IE / TIM 4 over their
RS-232 ports without modems (null modem).
Cable length 6 m
7,07,0
6NH1701-7AN Cable for connecting a TIM 11 (RS-232) with one of the SINAUT ST7
MD2, MD3 or MD4 modems (RS-232).
Cable length 2.5 m
0'7,0
6NH1701-7BK Cable for connecting a TIM011B (RS-232) with one of the SINAUT ST7
MD2, MD3 or MD4 modems (RS-232).
Cable length 1.0 m.
7,0
0'