Siemens SINAUT ST7 - Technical Specifications of SINAUT St7 Sc; Standards and Approvals of SINAUT ST7 Products; Standards and Approvals for the TIM 3, TIM 4 and SINAUT Modems; Notes on the CE Marks of SINAUT ST7 Products

Introduction to the SINAUT ST7 system
1.12 Standards and approvals of SINAUT ST7 products
Station control system
78 System Manual, 07/2009, C79000-G8976-C178-07
1.11.4 Technical specifications of SINAUT ST7sc
SINAUT ST7sc
Programming Open and standardized;
OPC interface "Data Access Interface V2.05";
Synchronous (IOPCSyncIO) and asynchronous
(IOPCAsyncIO2) reading and writing of variables over the
standard interface; The access to variables of the item buffer
uses asynchronous reads
Protocols DCOM protocol
Operating systems Windows XP Prof. SP1, SP2;
Windows 2000 Prof. SP1, 2, 3, 4
STEP 7/NCM versions SIMATIC NCM PC/S7 V5.3 SP2
or
SIMATIC STEP 7 V5.3 SP1
SIMATIC NET PC software versions SIMATIC NET PC software V6.2;
SIMATIC NET PC software V 6.3
Configuration ST7sc Config tool
Configuration limits
• 6 SINAUT stations
• 12 SINAUT stations
• More than 12 SINAUT stations
• Small license
• Medium license
• Large license
1.12 Standards and approvals of SINAUT ST7 products
1.12.1 Standards and approvals for the TIM 3, TIM 4 and SINAUT modems
1.12.1.1 Notes on the CE marks of SINAUT ST7 products
List of SINAUT ST7 products
Short name Order no. EMC
1)
TTE
2)
TIM 4R 6NH7 800-4AA90 *
TIM 4RD 6NH7 800-4AD90 *
MD2 6NH7 810-0AA20 ** 1
MD3 6NH7 810-0AA30 **
MD4 6NH7 810-0AA40 ** 2
1)
EMC Directive 2004/108/EEC
2)
TTE Directive 91/263/EEC