Introduction to the SINAUT ST7 system
1.12 Standards and approvals of SINAUT ST7 products
Station control system
80 System Manual, 07/2009, C79000-G8976-C178-07
1.12.1.2 FM, UL and CSA approvals for all SINAUT ST7 products
FM approval
The SINAUT ST7 products included in the "List of SINAUT ST7 products" are certified as
follows:
FM Approval according to Factory Mutual Approval Standard Class Number 3611, Class I,
Division 2, Group A, B, C, D
WARNING
Injury to persons and damage to property is possible.
Injury to persons and damage to property can occur in hazardous areas in the connecting
cables are removed while a SINAUT ST7 device is in operation.
Always turn off the power to SINAUT ST7 devices before removing connecting cables in
hazardous areas.
UL/CSA approval
The SINAUT ST7 products included in the "List of SINAUT ST7 products" are certified as
follows:
UL Recognition Mark
Underwriters Laboratories (UL) based on:
Standard UL 508
CSA Certification Mark
Canadian Standards Association (CSA) based on:
Standards CSA No. 14 and 142
File no. E208174
1.12.1.3 Additional approvals for the MD3 analog dial-up modem
List of SINAUT ST7 products including MD3 modem
Name Order no. Hardware version
TIM 33 6NH7 800-3AA30 6 or higher
TIM 43 6NH7 800-4AA30 6 or higher
TIM 43D 6NH7 800-4AD30 6 or higher
MD3 6NH7 810-0AA30 4 or higher
For the stand-alone MD3 modem and for all TIM modules with integrated MD3 modems
listed in the table, the following certifications apply for Europe, USA and Canada.
To Next Page
Loading...
