Siemens SINAUT ST7 - DIL Switches Accessible from above

Installing and putting a SINAUT modem into operation
5.5 MD2 dedicated line modem
Station control system
System Manual, 07/2009, C79000-G8976-C178-07
199
You will find examples of connecting the MD2 to a TIM, parallel connection of more than one
MD2 to connect a star ring network to a TIM, or the interconnection of two MD2s to form a
repeater below in the section
Connecting the MD2 with TIM, LTOP and dedicated line
(Page
208).
5.5.2 DIL switches accessible from above
The following figure shows the MD2 modem from above. It indicates the location of the 5-pin
and 10-pin DIL switches that are accessible from above.
        
    
SLQSLQ',/VZLWFKIRUVHWWLQJWKH
UHTXLUHGIXQFWLRQRIWKH0'GHGLFDWHG
OLQHPRGHP
)URQWSDQHOODEHOHGಪ0RGHPಫ
Figure 5-10 View of the MD2 modem from above
Settings with the DIL switches accessible from above
The following figure shows the settings possible on the 5-pin and 10-pin DIL switches. These
switches can be accessed from above through the grill in the modem housing.