Siemens SINAUT ST7 - Overview of the Radio Clock Components

Introduction to the SINAUT ST7 system
1.7 Radio clock components
Station control system
System Manual, 07/2009, C79000-G8976-C178-07
53
TIM
*36UHFHLYHUPRGXOH
7,0ZLWKLQWHJUDWHG
'&)UDGLRFORFNUHFHLYHU
'&)RXWSXWIRU
VLPXODWLRQVLJQDO
,QSXWIRU
*36VLJQDO
,QGLUHFW
OLJKWQLQJ
SURWHFWLRQ
BNC
adapter
plug
BNC
GPS outdoor antenna
for wall or mast mounting
incl. 25 m antenna cable
GPS kit
6NH9 831-8AA
Complete GPS package for simulating the
DCF77 time signal, comprising:
- GPS receiver module
- GPS outdoor antenna incl. 25 m cable
- BNC adapter plug
- Configuration software
- PC adapter cable
- Documentation
Adapter cable
6NH7 700-0AD15
Figure 1-18 GPS components for receiving the radio clock signal
1.7.3 Overview of the radio clock components
The following table shows the accessories for the DCF77 radio clock of the TIM.
Table 1- 5 Overview of the accessories for the DCF77 radio clock of the TIM
Short name Order no. Explanation
DCF INANT 6NH9831-0AA DCF77 indoor antenna.
The antenna is supplied with a 10 m cable and BNC
connector.
DCF AUANT-D 6NH9831-0BA DCF77 outdoor antenna for flat roof or wall mounting.
The antenna is supplied with a 20 m cable and BNC
connector.
DCF AUANT-M 6NH9831-0DA DCF77 outdoor antenna for mast mounting.
The antenna is supplied with a 20 m cable and BNC
connector.
DCF IND-BS 6NH9831-2AA Lightning protector for DCF77 outdoor antenna.