Introduction to the SINAUT ST7 system
1.12 Standards and approvals of SINAUT ST7 products
Station control system
System Manual, 07/2009, C79000-G8976-C178-07
87
FM approval
Factory Mutual Approval Standard Class Number 3611, Class I, Division 2, Group A, B, C,
D.
WARNING
Personal injury and property damage can occur.
In hazardous areas, personal injury or property damage can result if you create or break an
electrical circuit during operation of a SINAUT product (for example, by means of plug-in
connections, fuses, switches).
Do not create or break live electric circuits unless you are certain there is no danger of
explosion.
If you use SINAUT products under FM conditions, they must be mounted in an enclosure
that at least corresponds to IP54 in accordance with EN 60529.
To Next Page
Loading...
