Table of contents
Station control system
System Manual, 07/2009, C79000-G8976-C178-07
9
4.3.2 Front view of the TIM 4 with removed front panels....................................................................148
4.3.3 LEDs of the TIM 3 / TIM 4..........................................................................................................149
4.3.4 Pinout of the X1 and X2 connectors ..........................................................................................149
4.3.5 Standard connecting cables that can be connected to connector X1........................................151
4.3.6 View of the TIM 4 from above....................................................................................................154
4.3.7 View of the TIM 4 from below ....................................................................................................155
4.4 Options for connecting up and settings for the TIM 4R or TIM 4RD..........................................156
4.4.1 Possible attachments and settings for the TIM 4R and TIM 4RD..............................................157
4.5 Installing a TIM...........................................................................................................................160
4.5.1 Introduction ................................................................................................................................160
4.5.2 Important notes on using the device..........................................................................................160
4.5.3 Installing a TIM module as CP...................................................................................................162
4.5.4 Installing a TIM 4 / TIM 4R-IE as a standalone device ..............................................................163
4.5.5 Horizontal and vertical installation .............................................................................................164
4.5.6 Connecting the TIM to the power supply ...................................................................................165
4.6 Configuring a TIM and setting parameters ................................................................................167
4.7 Startup activities of the TIM module ..........................................................................................172
4.7.1 Startup of the TIM 3V-IE variants ..............................................................................................172
4.7.2 Startup activities of the TIM 4R-IE .............................................................................................175
4.7.3 Startup behavior of the TIM 4 ....................................................................................................177
5 Installing and putting a SINAUT modem into operation ......................................................................... 181
5.1 Overview ....................................................................................................................................181
5.2 Important notes on using the device..........................................................................................181
5.3 GSM/GPRS modem MD720-3...................................................................................................184
5.3.1 Displays and connectors............................................................................................................184
5.3.2 Connecting the MD720-3 to the TIM and antenna.....................................................................186
5.3.3 Prerequisites for operation.........................................................................................................187
5.3.4 Further documentation...............................................................................................................188
5.4 GPRS/GSM wireless modem MD741-1.....................................................................................188
5.4.1 Displays and connectors............................................................................................................188
5.4.2 Connecting the MD741-1 to the TIM and antenna.....................................................................191
5.4.3 Prerequisites for operation.........................................................................................................191
5.4.4 Further documentation...............................................................................................................192
5.5 MD2 dedicated line modem .......................................................................................................193
5.5.1 Displays and connectors accessible from the front ...................................................................193
5.5.2 DIL switches accessible from above..........................................................................................199
5.5.3 DIL switches and connectors accessible from below ................................................................205
5.5.4 Connecting the MD2 with TIM, LTOP and dedicated line..........................................................208
5.6 LTOP line transformer with overvoltage protection....................................................................219
5.6.1 Structure.....................................................................................................................................220
5.6.2 Connecting up the MD2 modem ................................................................................................222
5.7 Analog dial-up modem MD3 ......................................................................................................226
5.7.1 Indicators and connectors accessible from the front .................................................................226
5.7.2 Configuration switches accessible from above..........................................................................233
5.7.3 Connectors and configuration switches accessible from below ................................................242
5.7.4 Connecting the MD3 with a TIM and TAE6 outlet......................................................................246
5.7.5 Connecting the MD3 with TIM, LTOP and dedicated line..........................................................247
5.7.6 User-configurable profiles..........................................................................................................253
5.7.7 LTOP line transformer with overvoltage protection....................................................................256
To Next Page
Loading...
