808d-me62 5 0, 0, 0, 0, 0 0 20 1/1 M
808d-te42 4 0, 0, 0, 0 0 20 1/1 M
808d-te62 4 0, 0, 0, 0, 0 0 20 1/1 M
808d-mte40 4 1, 2, 3, 4, 5, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0,, ...
0 20 7/7 U
808d-mte60 20 1, 2, 3, 4, 5, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0,, ...
0 20 7/7 U
Description: Axis assignment at input point of 1st transformation
The index input at the nth position states which axis is mapped internally from the
transformation to axis n.
Not relevant:
No transformation
Releated to:
MD24200 $MC_TRAFO_TYPE_2, MD24300 $MC_TRAFO_TYPE_3, ...
MD24460 $MC_TRAFO_TYPE_8
References:
/FB/, F2, "5-Axis Transformation"
24120 TRAFO_GEOAX_ASSIGN_TAB_1 C07 F2, TE4, TE4, M1, K1, W1
- Assignment of the geometry axes to channel axes for
transformation 1
BYTE NEW CONF
-
808d-me42 3 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0...
0 20 1/1 M
808d-me62 3 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0...
0 20 1/1 M
808d-te42 3 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0...
0 20 1/1 M
808d-te62 3 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0...
0 20 1/1 M
808d-mte40 3 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0...
0 20 7/7 U
808d-mte60 3 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0...
0 20 7/7 U
Description: This MD states the channel axes on which the axes of the cartesian coordinate system
are mapped for active transformation 1.
Not relevant:
No transformation
Related to:
MD20050 $MC_AXCONF_GEOAX_ASSIGN_TAB, if no transformation is active.
References:
/FB/, K2, "Coordinate Systems, Axis Types, Axis Configurations, Workpiece-Related
Actual Value System, External Work Offset"
Machine data
3.3 Channel-specific machine data
Parameter Manual
List Manual, 01/2017 195
To Next Page
Loading...
