Siemens SINUMERIK 808D

Further significance of bits 9-11 only when bit 8 =1 and $AC_REQUIRED_PARTS > 0:
Bit 9 = 0: Counter $AC_ACTUAL_PARTS is incremented by 1 with a VDI output of M02/M30
Bit 9 = 1: Counter $AC_ACTUAL_PARTS is incremented by 1 with output of the M command
from MD PART_COUNTER_MCODE[1]
Bit 10 = 0: $AC_ACTUAL_PARTS also active with program test/block search
Bit 10 = 1: No machining $AC_ACTUAL_PARTS with program test/block search
Bit 11 = 1: Counter $AC_ACTUAL_PARTS is incremented by 1 on a return with GOTOS
Bit 12 - 15: Activating $AC_SPECIAL_PARTS
-------------------------------------------------------------------------
Bit 12 = 1: Counter $AC_SPECIAL_PARTS is active
Further significance of bits 13-15 only when bit 12 =1 and $AC_REQUIRED_PARTS > 0:
Bit 13 = 0: Counter $AC_SPECIAL_PARTS is incremented by 1 with a VDI output of M02/
M30
Bit 13 = 1: Counter $AC_SPECIAL_PARTS is incremented by 1 with output of the M
command from MD PART_COUNTER_MCODE[2]
Bit 14 = 0: $AC_SPECIAL_PARTS also active with program test/block search
Bit 14 = 1: No machining $AC_SPECIAL_PARTS with program test/block search
Bit 15 = 1: Counter $AC_SPECIAL_PARTS is incremented by 1 on a return with GOTOS
Bit 16 - 19: Extension $AC_TOTAL_PARTS
-------------------------------------------------------------------------
Meaning of the bits 16-19 applies only if Bit4 =1 and $AC_REQUIRED_PARTS > 0:
Bit 16 = 0: $AC_TOTAL_PARTS is active in MDI mode
Bit 16 = 1: No machining $AC_TOTAL_PARTS in MDI mode
Bit 17 Reserved!
Bit 18 Reserved!
Bit 19 Reserved!
Bit 20 - 23: Extension $AC_ACTUAL_PARTS
-------------------------------------------------------------------------
Meaning of bits 20-23 only if bit8 =1 and $AC_REQUIRED_PARTS > 0:
Bit 20 = 0: $AC_ACTUAL_PARTS is active in MDI mode
Bit 20 = 1: No machining $AC_ACTUAL_PARTS in MDI mode
Bit 21 Reserved!
Bit 22 Reserved!
Bit 23 Reserved!
Bit 24 - 27: Extension $AC_SPECIAL_PARTS
-------------------------------------------------------------------------
Meaning of bits 24-27 only if bit12 =1 and $AC_REQUIRED_PARTS > 0:
Bit 24 = 0: $AC_SPECIAL_PARTS is active in MDI mode
Bit 24 = 1: No machining $AC_SPECIAL_PARTS in MDI mode
Bit 25 Reserved!
Bit 26 Reserved!
Bit 27 Reserved!
Related to:
MD27882 $MC_PART_COUNTER_MCODE
Machine data
3.3 Channel-specific machine data
Parameter Manual
208 List Manual, 01/2017