Siemens SINUMERIK 810D

2
Operation 10.04
2.13 Tools and tool offsets
2
 Siemens AG, 2004. All rights reserved
2-138 SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition
Diameter
Rounding
radius
Length X
Length Z
Angle
for tapered
tools
3D tool
Length
Diameter
3D probe
You can load and unload tools to and from a magazine via the tool
list. When a tool is loaded, it is moved from its storage location to a
magazine location. When it is unloaded, it is removed from the
magazine and taken back to a storage location.
The loading and unloading of tool magazines is defined in a machine
data.
Please refer to the machine manufacturer's instructions.