0
10.04 Preface
0
ï›™ Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Operation/Programming ShopMill (BAS) – 10.04 Edition v
Preface
Structure of the
Documentation
The SINUMERIK documentation is organized in 3 parts:
• General Documentation
• User Documentation
• Manufacturer/Service Documentation
Audience
This documentation is intended for use by operators of vertical
machining centers or universal milling machines controlled by the
SINUMERIK 840D/840Di/810D system.
Validity
This Operation/Programming Guide is valid for ShopMill SW 6.4.
Hotline
Please address any queries to the following hotline:
A&D Technical Support
Tel.: +49 (0) 180 5050-222
Fax: +49 (0) 180 5050-223
Email: adsupport@siemens.com
If you have any queries (suggestions, corrections) concerning the
documentation, please send them to the following fax number or
email address:
Fax: +49 (0) 9131 98-2176
Fax form at the end of the documentation
Email: motioncontrol.docu@erlf.siemens.de
Internet address
http://www.cnc-werkstatt.de
http://www.siemens.com/motioncontrol
SINUMERIK 840D
powerline
Since 09.2001, improved-performance variants SINUMERIK 840D
powerline and SINUMERIK 840DE powerline are available. For a list
of available powerline modules, please refer to the following
Hardware Description:
Reference: /PHD/, SINUMERIK 840D Configuration Manual
SINUMERIK 810D
powerline
Since 12.2001, improved-performance variants SINUMERIK 810D
powerline and SINUMERIK 810DE powerline are available. For a list
of available powerline modules, please refer to the following
Hardware Description:
Reference: /PHC/, SINUMERIK 810D Configuration Manual
Standard scope
This Operator's/Programming Guide describes the functionality of the
ShopMill operator interface. Extensions or changes made by the
machine tool manufacturer are documented by the machine tool
manufacturer.
More detailed information about other publications relating to
SINUMERIK 840D/840Di/810D and publications that apply to all
SINUMERIK controls (e.g. Universal Interface, Measuring Cycles...)
can be obtained from your local Siemens branch office.
To Next Page
Loading...
Need help?
General
