Connecting
7
7.1 Overview
Connection options
The NCU has a series of interfaces via which the power supply and the remaining system
components are connected. The front cover of the NCU must be open to make the connections.
• The various SINAMICS components are connected with the NCU via DRIVE-CLiQ.
• Actuators and sensors can be connected to the digital inputs/outputs.
• The NCUs have the following communication options:
– PROFIBUS DP, MPI, Ethernet
– PROFINET
The following overview shows an example of the various interfaces and their connection
options.
NCU 7x0.3B PN
Equipment Manual, 10/2020, 6FC5397-1EP40-6BA1 45
To Next Page
Loading...
