3
3-35
 Siemens AG 2000 All Rights Reserved
SINUMERIK 840D Installation and Start-Up Guide (IAD) – 04.00 Edition
Settings, MPI / OPI
3.1 MPI/OPI networking rules 3-36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 Standard configuration 3-38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.1 Standard configuration up to SW 3.1 3-38. . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2.2 Standard configuration as from SW 3.2 3-40. . . . . . . . . . . . . . . . . . . . . . . . .
3.3 Connection of a 2nd MCP/Interface customer operator panel and/or
1 HHU (up to SW 3.1) 3-43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3.1 Connection to OPI bus 3-44. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3.2 Connection to MPI bus 3-45. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3.3 Example of a configuration of MCP and HHU via OPI 3-46. . . . . . . . . . . . .
3.3.4 Example of a configuration of HHU via MPI 3-47. . . . . . . . . . . . . . . . . . . . . .
3.4 Handheld unit (HHU) 3-52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4.1 Settings in HHU up to software version 3.x 3-52. . . . . . . . . . . . . . . . . . . . . .
3.4.2 Settings on the HHU for software version 4.x and higher 3-53. . . . . . . . . .
3.4.3 Configuring the HHU, setting the interface parameters 3-53. . . . . . . . . . . .
3.4.4 Example: Connecting the HHU to the SINUMERIK 840D 3-55. . . . . . . . . .
3.5 Handheld programming unit 3-56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.1 Interface signals of the HPU 3-57. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5.2 Standard configuration of HPU (without MCP) 3-58. . . . . . . . . . . . . . . . . . .
3.5.3 Differences from the standard HPU configuration (up to SW 3.1) 3-59. . .
3.6 Machine control panel (MCP) 3-66. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.7 Customer operator panel interface 3-68. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.8 Second machine control panel 3-69. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.9 MMC 100/MMC 102/103 operator panel 3-69. . . . . . . . . . . . . . . . . . . . . . . .
3.9.1 Settings on MMC 3-69. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.9.2 Language defaults 3-70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
To Next Page
Loading...
Need help?
General
