Component Description
HLA Controls (open-loop and closed-loop) electrohydraulic control valves in
hydraulic linear axes in conjunction with SINUMERIK ONE
S120M This is the distributed version of the modular SINAMICS S120 drive sys‐
tem.
Additional information
Additional information about Line, Motor and Power Modules is provided in:
• Booksize Power Units Equipment Manual
• Chassis Power Units Equipment Manual
• AC DRIVE Equipment Manual
• HLA System Manual
• S120M Equipment Manual
Additional information about the Combi is provided in:
• SINAMICS S120 Combi Equipment Manual
Additional information about HF Motor Modules and the associated components is available
in:
• High Frequency Drive System Manual
You can nd additional information on all of the other modules in:
• Control Units and Additional System Components Equipment Manual
8.7 Use of Ethernet interfaces
Application
The following connections can be established via the Ethernet interfaces:
• X120 provides the link to the system network (e.g. operator panels).
• X130 connects the NCU to the company network.
• X127 is used for commissioning and remote diagnostics via teleservice adapter IE.
You can nd further details in the following manuals:
– SINUMERIK ONE Commissioning Manual Basic Software and Operating Software
– SIMATIC TS Adapter IE Manual
Properties
The interfaces are full duplex 10/100/1000 Mbit Ethernet ports. The ports are connected as an
Ethernet end device.
Connecting
8.7Use of Ethernet interfaces
NCU 1750
72 Equipment Manual, 10/2023, A5E45627807B AH
To Next Page
Loading...
Need help?
General
