Connectable components
12
12.1 NX10.3/NX15.3
12.1.1 Description
Properties
Using this module, you can expand the performance of an axis grouping of the SINUMERIK ONE
CNC automation system. Each NX10.3 can control up to 3 additional axes and each NX15.3 can
control up to 6 additional axes.
The NX module has the following interfaces:
• 4 DRIVE-CLiQ (X100 – X103)
• 6 digital inputs and 4 digital inputs/outputs (X122)
• Power supply (X124)
NCU 1750
Equipment Manual, 10/2023, A5E45627807B AH 99
To Next Page
Loading...
