3397UT613/63x Manual
C53000-G1176-C160-2
Mounting and Commissioning 3
This chapter is primarily intended for experienced commissioning engineers. The
commissioning engineer must be familiar with the commissioning of protection and
control systems, with the management of power systems and with the relevant safety
rules and guidelines. Under certain circumstances adaptations of the hardware to the
particular power system data may be necessary. The primary tests require the protect-
ed object (line, transformer etc.) to carry load.
3.1 Mounting and Connections 340
3.2 Checking Connections 374
3.3 Commissioning 379
3.4 Final Preparation of the Device 420
To Next Page
Loading...
