Glossary
629
7UT613/63x Manual
C53000-G1176-C160-2
Project Content-wise, a project is the image of a real power supply system. Graphically, a
project is represented as a number of objects which are integrated in a hierarchical
structure. Physically, a project consists of a number of directories and files containing
project data.
Protection devices All devices with a protective function and no control display.
Reorganizing Frequent addition and deletion of objects results in memory areas that can no longer
be used. By reorganizing projects, you can release these memory areas again. How-
ever, a cleanup also reassigns the VD addresses. The consequence is that all SIPRO-
TEC 4 devices have to be reinitialized.
RIO file Relay data Interchange format by Omicron.
RSxxx-interface Serial interfaces RS232, RS422/485
SCADA Interface Rear serial interface on the devices for connecting to a control system via IEC or
PROFIBUS.
Service port Rear serial interface on the devices for connecting DIGSI (for example, via modem).
Setting parameters General term for all adjustments made to the device. Parameterization jobs are exe-
cuted by means of DIGSI or, in some cases, directly on the device.
SI → Single point indication
SI_F → Single point indication transient → Transient information, → Single point indication
SICAM SAS Modularly structured station control system, based on the substation controller →
SICAM SC and the SICAM WinCC operator control and monitoring system.
SICAM SC Substation Controller. Modularly structured substation control system, based on the
SIMATIC M7 automation system.
SICAM WinCC The SICAM WinCC operator control and monitoring system displays the state of your
network graphically, visualizes alarms, interrupts and indications, archives the network
data, offers the possibility of intervening manually in the process and manages the
system rights of the individual employee.
Single command Single commands are process outputs which indicate 2 process states (for example,
ON/OFF) at one output.
Single point indica-
tion
Single indications are items of process information which indicate 2 process states (for
example, ON/OFF) at one output.
SIPROTEC The registered trademark SIPROTEC is used for devices implemented on system
base V4.
To Next Page
Loading...
Need help?
General
