Siemens SIPROTEC 7UT63 series User Manual

2.1 General
75
7UT613/63x Manual
C53000-G1176-C160-2
Feeder 1
• Address 561 STRPNT->BUS I1 = transformer starpoint versus busbar for feeder 1,
• Address 562 IN-PRI CT I1 = rated primary transformer current for feeder 1,
• Address 563 IN-SEC CT I1 = rated secondary transformer current for feeder 1.
Feeder 2
• Address 571 STRPNT->BUS I2 = transformer starpoint versus busbar for feeder 2,
• Address 572 IN-PRI CT I2 = rated primary transformer current for feeder 2,
• Address 573 IN-SEC CT I2 = rated secondary current for feeder 2.
Feeder 3
• Address 581 STRPNT->BUS I3 = transformer starpoint versus busbar for feeder 3,
• Address 582 IN-PRI CT I3 = rated primary transformer current for feeder 3,
• Address 583 IN-SEC CT I3 = rated secondary current for feeder 3.
Feeder 4
• Address 591 STRPNT->BUS I4 = transformer starpoint versus busbar for feeder 4,
• Address 592 IN-PRI CT I4 = rated primary transformer current for feeder 4,
• Address 593 IN-SEC CT I4 = rated secondary current for feeder 4.
Feeder 5
• Address 601 STRPNT->BUS I5 = transformer starpoint versus busbar for feeder 5,
• Address 602 IN-PRI CT I5 = rated primary transformer current for feeder 5,
• Address 603 IN-SEC CT I5 = rated secondary current for feeder 5.
Feeder 6
• Address 611 STRPNT->BUS I6 = transformer starpoint versus busbar for feeder 6,
• Address 612 IN-PRI CT I6 = rated primary transformer current for feeder 6,
• Address 613 IN-SEC CT I6 = rated secondary current for feeder 6.
Feeder 7
• Address 621 STRPNT->BUS I7 = transformer starpoint versus busbar for feeder 7
• Address 622 IN-PRI CT I7 = rated primary transformer current for feeder 7,
• Address 623 IN-SEC CT I7 = rated secondary current for feeder 7.
Feeder 8
• Address 631 STRPNT->BUS I8 = transformer starpoint versus busbar for feeder 8,
• Address 632 IN-PRI CT I8 = rated primary transformer current for feeder 8,
• Address 633 IN-SEC CT I8 = rated secondary current for feeder 8.
Feeder 9
• Address 641 STRPNT->BUS I9 = transformer starpoint versus busbar for feeder 9,
• Address 642 IN-PRI CT I9 = rated primary transformer current for feeder 9,
• Address 643 IN-SEC CT I9 = rated secondary current for feeder 9.
The following settings are only available in 7UT635:
Feeder 10
• Address 651 STRPNT->BUS I10 = transformer starpoint versus busbar for feeder
10,
• Address 652 IN-PRI CT I10 = rated primary transformer current for feeder 10,
• Address 653 IN-SEC CT I10 = rated secondary current for feeder 10.

Siemens SIPROTEC 7UT63 series Specifications

General

Brand	Siemens
Model	SIPROTEC 7UT63 series
Category	Protection Device
Language	English