SIRIUS 3RF34 solid-state switching devices
3.1 Safety instructions
SIRIUS Innovations
System Manual, 01/2011, A8E56203870002-03
315
3.1.1 Standards
Standards and approvals
● IEC 60947-4-2
● UL 508, CSA for North America
1)
● CE mark for Europe
● C-Tick approval for Australia
● CCC for China
1)
Please note: Use overvoltage protection device;
max. cut-off-voltage 6000 V;
min. energy handling capability 100J.
Applicable standards
The product meets the requirements of the following standards:
Table 3- 1 Applied standards (product)
Applications Standard
Device standard DIN IEC 60947-4-2
Terminal designations/Terminal markings DIN EN 50011
Degree of protection IP20 DIN IEC 0529
Vibration resistance DIN IEC 60068-2-6
Shock resistance DIN IEC 60068-2-27
EMC standard DIN IEC 60947-4-2; DIN IEC 61000-4-2;
DIN IEC 61000-4-6; DIN IEC 61000-4-4;
DIN IEC 61000-4-5
Resistance to extreme climates DIN IEC 60068-2-61 (sequence of tests),
DIN IEC 60068-2-30 (damp heat),
DIN IEC 60068-2-2 (dry heat),
DIN IEC 60068-2-1 (cold),
DIN IEC 60068-2-14 (temperature change)
Reference
The standards from Catalog LV 1 "Low-Voltage Controls and Distribution SIRIUS -
SENTRON - SIVACON" in the appendix always apply. You will find extracts from the most
important standards relating to the SIRIUS modular system in the chapter titled System
overview, underStandards (Page 23).
To Next Page
Loading...
Need help?
General
