SIRIUS 3RT2 contactors/contactor assemblies
2.7 Accessories
SIRIUS Innovations
System Manual, 01/2011, A8E56203870002-03
207
2.7.20 Insulating stop
2.7.20.1 Description
The insulating stop is available in the following versions.
Table 2- 62 Versions of the insulating stop
Size Order number Can be used for
S00 3RT2916-4JA02 Basic devices 3RT2.1 and 3RH21
S0 3RT1916-4JA02
ï‚· Terminals for the auxiliary circuit and the control circuit of basic
device 3RT2.2
ï‚· Auxiliary switch blocks which can be mounted on the front and
side
The insulating stop is for contactors with spring-loaded connections. In the case of
conductors with a small conductor cross-section (≤ 1mm
2
), it ensures that the conductor
insulation is not clamped with the rest of the cable. An insulating stop unit comprises 5 pairs
of terminals which can be separated. The diagram below illustrates an example of how the
the 3RT2916-4JA02 insulating stop can be used on a size S00 basic device.
Figure 2-36 Insulating stop on spring-loaded connection
To Next Page
Loading...
Need help?
General
