Siemens SIRIUS 3RW55 - Page 58





[
[
PP
PP
5:
5:
5:
5:
Illustration similar
• Screw the lower 2 screws into the mounting plate ①. Ensure that both screws protrude by
at least 1.5 cm (at least 2 cm for size 4) and then place the 3RW55 or 3RW55 Failsafe soft
starter onto the 2 lower screws ② from above.
• Tilt the 3RW55 or 3RW55 Failsafe soft starter up so that it is resting level against the mounting
plate ③ and tighten all 4 screws with the speci󹪝ed torque ④.
Procedure for size 5
CAUTION
Heavy device
Device can cause injury if it falls.
Always ask a second person to help you transport, install and remove a heavy device. Use
suitable lifting equipment and wear personnel protective equipment.
Mounting and dismantling
4.3 Mount the 3RW55 and 3RW55 Failsafe soft starters on a level surface
SIRIUS 3RW55 and 3RW55 Failsafe Soft Starters
58 Equipment Manual, 02/2022, A5E35630887002A/RS-AF/006