Configuration
Fig. 27 Holiday Setup screen.
z You can save your changes by highlighting OK and pressing the
button
.
Selecting Cancel exits the screen without saving the changes.
z Highlight the Time Sync… box and press the button. You can set up time
synchronization between the DVR and standard time servers that are available
in most time zones and countries or between the DVR and another DVR.
Fig. 28 Time Sync screen.
z Highlight the box beside Automatic Time Sync and press the button. This
toggles between On and Off.
z Highlight the box beside SNTP Server and press the button. Change the
numbers by highlighting them and using the Up and Down arrow buttons to
increase or decrease the number value.
z Highlight the box beside Interval and press the button. Set the time interval
for synchronization from 1 to 300 minutes.
z The box beside System Clock displays the DVR's time setting.
z The box beside Server Clock displays the time setting of the time server.
Highlighting the Update button and pressing the
button updates the server
clock.
NOTE:
The Server Clock will display “
–” when the DVR cannot load the time information from the time server.
30
Siemens Building Technologies SISTORE AX9 AX16_EN.doc
Fire & Security Products 09.2004
To Next Page
Loading...
Need help?
General
