Configuration
You can save your changes by highlighting OK and pressing
button
. Selecting
Cancel exits the screen without saving the changes.
Selecting Manual displays a screen where you set up manual archive parameters.
Fig. 69 Manual Archive screen.
Highlight the boxes beside From and To and press the
button to set up the
archive start and stop times and dates.
Once you set the archive start and stop times and dates, highlight the Archive Now
button and press the
button.
You can end the archiving process at any time by highlighting the Stop button and
pressing the
button.
NOTE:
The Stop button will display only during archiving.
NOTE:
If you have a large quantity of recorded video to archive, either stop recording or reset the recording
speed. The oldest data to be archived might be overwritten if the hard disk is full.
65
Siemens Building Technologies SISTORE AX9 AX16_EN.doc
Fire & Security Products 09.2004
To Next Page
Loading...
Need help?
General
