Siemens SITRANS LR500 Series User Manual

7.6.7 Testing the con󹪝gur
ation
After con󹪝guring the device, it is recommended that you test the device to ensure that it
performs to your speci󹪝cations. This test can be run in simulation mode or by varying the actual
process value in the application. The latter is preferred, as it more accurately represents
operating conditions. However, if it is not possible to do a physical test, a simulation will ensure
that control programming is correct. For more details, see Simulation (Page89).
Commissioning
7.6Local commissioning
SITRANS LR500 series with mA/HART
84 Operating Instructions, 03/2024, A5E51099898-AA

Siemens SITRANS LR500 Series Specifications

General

Brand	Siemens
Model	SITRANS LR500 Series
Category	Transmitter
Language	English