2BPRODUCT OVERVIEW
3.6 Setting the scale with SIWATOOL U
For the setting of the scale, there is a special program SIWATOOL U for Windows
XP operating system.
The program enables the weighing specialist to commission the scale without
having any prior knowledge of automation technology. When servicing, you can
analyze and test the processes in the scale independently of the automation
system with the aid of the PC. The diagnostic information readout from SIWAREX
U is very helpful for analyzing events.
The following picture shows the layout of the individual program windows.
Figure 3-4 SIWATOOL U overview
SIWATOOL U doesn't just support you in the setting of the scale. The feature of
analyzing the diagnostic buffer, which can be saved after the readout from the
module along with the parameters, is very helpful.
It is possible to switch between German and other languages in the program.
SIWAREX U 3-9
To Next Page
Loading...
Need help?
General
