Siemens Siwarex U User Manual

0BPREFACE
1 Preface
1.1 Purpose of the manual
In this manual you will find all the necessary information on the setup and
operation of SIWAREX U.
1.2 Required basic knowledge
In order to be able to understand the manual, a general knowledge of SIMATIC
automation technology is required. In addition, knowledge of weighing technology
is beneficial.
1.3 Scope of this manual
This manual is valid for SIWAREX U modules which have been produced since
October 2007.
Model Name Order number From product revision
(Version)
SIWAREX U SIWAREX U 7MH4950-1AA01
7MH4950-2AA01
HW 1.0 FW 1.1
Table 1-1 Scope of this manual
Note
The manual describes the weighing electronics SIWAREX U as part of the system
SIMATIC S7 300 and ET 200M and is to be used in addition to the SIMATIC manuals.
Note
This manual contains the description of the modules which were valid at the time of
publication.
We reserve the right to attach product information containing up-to-date information
about the modules to new modules or modules in a later version.
SIWAREX U 1-1

Siemens Siwarex U Specifications

General

Brand	Siemens
Model	Siwarex U
Category	Control Unit
Language	English