Mobility and Logistics, Traffic Solutions
Sopers Lane, Poole, Dorset, BH17 7ER
Security classification
property name.
Page
15 of 73
Version 008
Status
Released
Last Editor Nathan Fearnhead
Date
16/06/2017
Document Name Configuration Control
Document No.
667/CC/32750/000
Copyright © Mobility 2017. All Rights Reserved. Mobility is a division of Siemens Plc
Figure 5
Large ST900 Outer Cabinet with 19” Swing Frame
Warning! Figure 5 shows a Gemini² unit, full configuration details of which are detailed
later in this document. It is important that the Gemini Last Gasp Dial Battery, within the
Gemini Power Supply Unit, is orientated correctly; the battery terminal must be facing up.
If the unit is to be mounted in such a way that the battery terminals are not facing up then it is
necessary to implement certain modifications to ensure that the battery is not operating upside
down. Please refer to document 667/HB/32600/000 for the necessary modifications.
19” Swing
Frame
19”
Detector
Rack kit
Assembly,
Primary
Position
or
WiMag
Rack
Position
Note
SLD4
replaces
the ST4S
Secondary
Position for
19” Rack Kit
Assembly
for when
TC12 O.T.U
is fitted or
WiMag
Rack
Position if
required
Transformer
position,
(Transformer
Master Switch
Unit and
Maintenance
Backplane
Rack
Assembly
I/O Card
To Next Page
Loading...
