Sierra Wireless FX30S - Page 76

Sierra Wireless FX30S User Guide
Rev. 7 August 2021 76 41110485
AT!MAPUART?
Query UART Status
To query:
AT!MAPUART?
Values returned are !MAPUART: <service UART1>,<service UART2>
where <service> can be:
0—UART disabled
1—AT Command service
2—Diagnostic Message service
3—Reserved
4—NMEA service
5–13—Reserved
14—RS-485 Linux application (Note: Not available for UART 2)
15—RS232 with Hardware Flow control:
• Linux application (UART 1)
16—Linux console
17—Customer Linux application
Example:
!MAPUART:17,0
OK
Note: Be aware that the status format is different from the configuration format. For example, a returned status of 17,0
means that UART1 is configured as a Customer Linux Application, and UART2 is disabled.
Table C-2: FX30S AT Commands
Command Description