Rev. 7 August 2021 8 41110485
1
1: Introduction to the FX30S
The Sierra Wireless
®
FX30S, a small, rugged, programmable Internet of Things (IoT)
gateway, runs the secure Legato
®
Application Framework, and a long-term support
Linux
®
operating system. You can use the FX30S as a simple USB modem, but its full
potential is realized when you use it as an embedded cellular platform for IoT applications.
With RS232/RS485, USB, I/O interfaces, and IoT Expansion cards, the FX30S can
connect to many machines and infrastructures. The Linux-based Legato framework
enables you to use efficient low-level C programming to write IoT applications for any
connected machine.
The FX30S is also available as an Octave edge device. Octave is Sierra Wireless' all-in-
one edge-to-cloud solution for connecting industrial assets. See sierrawireless.com/
octave/devices for more information.
Key Features
• Broad range of LTE & 3G Radio Technologies available (radio module dependent)
The following FX30S variants are currently available:
· Penta-band HSPA+ (WP8548)
· LTE Cat-M1/NB1 (WP7702)
• RS232/RS-485 Serial port
• USB 2.0
• mini-SIM slot
• Three configurable I/Os
• IoT expansion card slot
• GNSS (GPS/Galileo/GLONASS/BeiDou
1
)
• Linux-based Legato Embedded Application Framework
• Octave
TM
All-in-One Edge-to-Cloud solution
• Ultra low power mode
1. Support varies depending on radio module
To Next Page
Loading...
