113
FILE NUMBERING SYSTEM
Stored data is automatically assigned file numbers from 0001 to 9999.
When data is being reviewed, the file number of each image is
displayed in the right corner on the color LCD monitor (see P. 7 7 , 8 2 ).
The file number is also incorporated into the filename of the image.
The filename consists of “SDIM” followed by the 4-digit file number and
extension. For example: image number 0023 will be stored in the file
SDIM0023.X3F.
All DP2 image files will be stored to ###SIGMA folder of the DCIM
folder in the card.
● When [Adobe RGB] is selected from [ Shooting Menu] (P. 2 6 ) →
[Color space], the filename will consist of “_SDI” instead of “SDIM”.
● File numbering can be continuous, or can be reset every time an
empty card is detected. The File Numbering can be set from
[
Camera Settings] (P. 2 6) → [
File Numbering
].
FILE NUMBERING OPTIONS
Continuous *
Numbering is continuous. The first file number
assigned on an empty card will be one higher than
the last assigned number. (If the inserted card
contains DP2 images with file numbers greater than
the last assigned number, file numbering will
continue with one higher than the highest file
number on the card.)
Auto Reset
Each time an empty card is inserted, or all images
on the current card are deleted, the file number will
reset to its default value of 0001. (If the inserted
card already contains DP2 images, the file number
will not be reset).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
