Sigma DP2 User Manual

75
REVIEWING AND
DELETING IMAGES
This section explains how to review and delete images after
they have been captured.
TIP
• The DP2 may not be able to display images captured by other cameras,
or “DP2” images that have been renamed or moved from the DCIM
folder on the card.
QUICK PREVIEW
The DP2 camera can be set to automatically display a preview
of each image immediately after it is taken. This is useful for
instantly checking exposure and framing.
CHANGING THE QUICK PREVIEW DURATION
The Quick Preview image can be completely disabled, if you select
‘Off’, or displayed for 2, 5, or 10 seconds.
The Quick Preview Duration can be set from [ Capture Settings]
(P. 2 6) → [Quick Preview].
QUICK PREVIEW OPTIONS
Off No preview image is displayed.
2 sec.* Preview image is displayed for 2 seconds.
5 sec. Preview image is displayed for 5 seconds.
10 sec. Preview image is displayed for 10 seconds.

Sigma DP2 Specifications

General

Megapixel	14.06 MP
Camera type	Compact camera
Sensor type	CMOS
Supported aspect ratios	3:2
Digital zoom	- x
Fixed focal length	24.2 mm
Interface	USB2.0, NTSC/PAL
Digital SLR	No
Built-in flash	Yes
Dimensions (WxDxH)	113.3 x 56.1 x 59.5 mm
Camera shutter speed	1/2000 - 15 s
Focus	TTL
Focus adjustment	Auto
Auto focusing (AF) modes	centre weighted auto focus, spot auto focus
Motion JPEG frame rate	30 fps
Maximum video resolution	320 x 240 pixels
Display diagonal	2.5 \
Display resolution (numeric)	230000 pixels
USB version	2.0
Product color	Black
Battery type	BP-31
Battery life (CIPA standard)	250 shots
Bundled software	Sigma PhotoPro
Compatible memory cards	mmc, sd
White balance	auto, custom modes, daylight, Fluorescent, Incandescent, Shade

Weight and Dimensions

Depth	56.1 mm
Width	113.3 mm
Height	59.5 mm
Weight	260 g