42
WARNING !!
• When is shown on the color LCD monitor, the camera is set
slower than 1/25). If this mark is displayed, please use the flash
(P.46, 69) or a tripod.
• If the subject is too bright or dark, both shutter speed and aperture
value indicators will blink and will show the limit values. If you take
a picture with these settings, the picture will be overexposed or
underexposed.
PROGRAM SHIFT
You can change the combination of shutter speed and aperture
value, which were automatically selected by the camera. Use the
button to set the desired combination of shutter speed and
aperture value.
■ It will be canceled automatically,
after taking the picture.
To Next Page
Loading...
