Sigma DP2 User Manual

64
FLASH EXPOSURE COMPENSATION
It is possible to compensate the flash output level without changing
the background’s exposure.
1
Press the button after ejecting the flash by
using the Flash Pop-up lever. (The Allocate
function guide will be displayed on the bottom of
the LCD monitor. The
icon and the orange
compensation value will be displayed in the
upper-left corner of the LCD.)
• It is not possible to set the Flash Exposure Compensation if the
built-in flash is in the inserted position.
2
Select the desired compensation value by using buttons.
• Exposure compensation can be set in 1/3 stop increments from +3.0
to -3.0 stops.
3
Press the button again to apply the settings. (The color of the
compensation value will turn from orange to white and the Allocate
function guide will disappear)
CAUTION!!
• The exposure compensation will not disable automatically. After
taking the picture, set the compensation value to ±0.0 by above
procedure.

Sigma DP2 Specifications

General

Megapixel	14.06 MP
Camera type	Compact camera
Sensor type	CMOS
Supported aspect ratios	3:2
Digital zoom	- x
Fixed focal length	24.2 mm
Interface	USB2.0, NTSC/PAL
Digital SLR	No
Built-in flash	Yes
Dimensions (WxDxH)	113.3 x 56.1 x 59.5 mm
Camera shutter speed	1/2000 - 15 s
Focus	TTL
Focus adjustment	Auto
Auto focusing (AF) modes	centre weighted auto focus, spot auto focus
Motion JPEG frame rate	30 fps
Maximum video resolution	320 x 240 pixels
Display diagonal	2.5 \
Display resolution (numeric)	230000 pixels
USB version	2.0
Product color	Black
Battery type	BP-31
Battery life (CIPA standard)	250 shots
Bundled software	Sigma PhotoPro
Compatible memory cards	mmc, sd
White balance	auto, custom modes, daylight, Fluorescent, Incandescent, Shade

Weight and Dimensions

Depth	56.1 mm
Width	113.3 mm
Height	59.5 mm
Weight	260 g