nchro Mode
External Flash Sync. Hotshoe (X Sync. Contact)
Drive Modes
Single, Continuous (3 frames/RAW) (4 frames/JPEG)
Self Timer (2sec. /10sec.)
LCD Monitor approx. 230,000 pixels, 2.5 inches TFT color LCD monitor
LCD Monitor
Language
English / Japanese / German / Chinese (Simplified) /
French Spanish / Italian / Korean / Russian
Interface
USB (USB2.0),
Video Out (NTSC/PAL), Audio Out (Monaural)
Power Li-ion Battery BP-31, AC Adapter SAC-3 (Optional)
Battery Life Approx. 250 (+25°c)
Dimensions 113.3mm/4.5” (W) × 59.5mm /2.3”(H) ×56.06mm/2.2” (D)
Weight 260g / 9.2oz (without battery and card)
CONNECTING YOUR CAMERA TO A COMPUTER
The DP2 camera can be connected directly to a computer using the
provided USB cable. Make sure that the camera is off before
connecting it to the computer. Data transfer rates will vary depending
on the computer and operating system used. For further information,
please refer to the SIGMA Photo Pro User Guide, which is available in
PDF format on the supplied CD-ROM.
CONNECTING THE CABLES
z Please confirm that [USB Mode] is set
to [Mass Storage] in the [
Camera
Settings] menu before connecting
your camera to a PC with supplied
USB cable.
z The shutter button and color LCD
monitor will be disabled while the
camera is connected to the computer
via a USB cable.
WARNING!!
• Please use only the USB cable supplied with your camera.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
