Sigma DP2 User Manual

21
TO REMOVE THE BATTERY
1
Make sure the camera is turned off and
open the Battery
/ Card Cover in the
direction as shown by the arrow.
2
Eject the battery by sliding the battery
compartment cover latch in the direction
of the arrow, as shown in the illustration.
WARNING!!
• While the Busy Lamp is on, please do not remove the battery.
Doing so can result in data loss. Moreover, the camera and card
may be damaged.

Sigma DP2 Specifications

General

Megapixel	14.06 MP
Camera type	Compact camera
Sensor type	CMOS
Supported aspect ratios	3:2
Digital zoom	- x
Fixed focal length	24.2 mm
Interface	USB2.0, NTSC/PAL
Digital SLR	No
Built-in flash	Yes
Dimensions (WxDxH)	113.3 x 56.1 x 59.5 mm
Camera shutter speed	1/2000 - 15 s
Focus	TTL
Focus adjustment	Auto
Auto focusing (AF) modes	centre weighted auto focus, spot auto focus
Motion JPEG frame rate	30 fps
Maximum video resolution	320 x 240 pixels
Display diagonal	2.5 \
Display resolution (numeric)	230000 pixels
USB version	2.0
Product color	Black
Battery type	BP-31
Battery life (CIPA standard)	250 shots
Bundled software	Sigma PhotoPro
Compatible memory cards	mmc, sd
White balance	auto, custom modes, daylight, Fluorescent, Incandescent, Shade

Weight and Dimensions

Depth	56.1 mm
Width	113.3 mm
Height	59.5 mm
Weight	260 g