Sigma DP2 User Manual

76
TIP
• To manually turn off the Quick Preview image, press the shutter button
half-way.
• It will not be possible to zoom in to the preview image, or change to
another image while the Quick Preview is up.
REVIEWING IMAGES
The pictures captured by the DP2 can be reviewed in various
ways.
To review images captured by the DP2 camera press the
button on the back of the camera. The last image recorded on the
card will be displayed on the color LCD monitor.
Press the button to display an image on the color
LCD monitor.
Press the
button again to change to shooting
mode.
TIP
• Even if the camera is switched off, images can be reviewed by pressing
and holding the button for 2 seconds.
• If no new images have been captured, the last reviewed image will be
displayed.
• If there are no images on the card, an error message “No images on
Memory card” will be displayed.
• When reviewing images, if the button is pressed or the shutter
button is pressed “half-way”, the DP2 will be changed back to shooting
mode.

Sigma DP2 Specifications

General

Megapixel	14.06 MP
Camera type	Compact camera
Sensor type	CMOS
Supported aspect ratios	3:2
Digital zoom	- x
Fixed focal length	24.2 mm
Interface	USB2.0, NTSC/PAL
Digital SLR	No
Built-in flash	Yes
Dimensions (WxDxH)	113.3 x 56.1 x 59.5 mm
Camera shutter speed	1/2000 - 15 s
Focus	TTL
Focus adjustment	Auto
Auto focusing (AF) modes	centre weighted auto focus, spot auto focus
Motion JPEG frame rate	30 fps
Maximum video resolution	320 x 240 pixels
Display diagonal	2.5 \
Display resolution (numeric)	230000 pixels
USB version	2.0
Product color	Black
Battery type	BP-31
Battery life (CIPA standard)	250 shots
Bundled software	Sigma PhotoPro
Compatible memory cards	mmc, sd
White balance	auto, custom modes, daylight, Fluorescent, Incandescent, Shade

Weight and Dimensions

Depth	56.1 mm
Width	113.3 mm
Height	59.5 mm
Weight	260 g